-- *******************************************************************
-- CISCO-DOT11-ASSOCIATION-MIB.my:
-- CISCO DOT11 ASSOCIATION MIB file
--
-- April 2002, Francis Pang
--
-- Copyright (c) 2002-2007 by Cisco Systems, Inc.
-- All rights reserved.
-- *******************************************************************
--CISCO-DOT11-ASSOCIATION-MIB DEFINITIONS::=BEGINIMPORTSMODULE-IDENTITY,OBJECT-TYPE,
Gauge32,Counter32,Integer32,Unsigned32FROM SNMPv2-SMI
MODULE-COMPLIANCE,OBJECT-GROUPFROM SNMPv2-CONF
TEXTUAL-CONVENTION,MacAddress,TruthValueFROM SNMPv2-TC
ifIndex,InterfaceIndexFROM IF-MIB
InetAddressType,InetAddressFROM INET-ADDRESS-MIB
SnmpAdminStringFROM SNMP-FRAMEWORK-MIB
cd11IfAuxSsid,
CDot11IfVlanIdOrZero,
CDot11IfCipherType
FROM CISCO-DOT11-IF-MIB
ciscoMgmt
FROM CISCO-SMI;
--********************************************************************
--* MODULE IDENTITY
--********************************************************************ciscoDot11AssociationMIB MODULE-IDENTITYLAST-UPDATED"200701050000Z"ORGANIZATION"Cisco Systems Inc."CONTACT-INFO" Cisco Systems
Customer Service
Postal: 170 West Tasman Drive,
San Jose CA 95134-1706.
USA
Tel: +1 800 553-NETS
E-mail: cs-dot11@cisco.com"DESCRIPTION"This MIB module provides network management
information on IEEE 802.11 wireless device
association management and data packet forwarding
configuration and statistics. This MIB is an
extension to the IEEE802dot11-MIB and provides
per client based information.
The IEEE802dot11-MIB is defined in the IEEE Std
802.11-Jan 14 1999, Wireless LAN Medium Access
Control and Physical Layer Specifications, by the
LAN MAN Standards Committee of the IEEE Computer
Society.
GLOSSARY and ACRONYMS
Access point (AP)
Transmitter/receiver (transceiver) device
that commonly connects and transports data
between a wireless network and a wired network.
AES
Advanced Encryption Standard
Association
The service used to establish access point
or station mapping and enable STA invocation
of the distribution system serivces.
(Wireless clients attempt to connect to
access points.)
Bridge
Device that connects two or more segments
and reduces traffic by analyzing the
destination address, filtering the frame,
and forwarding the frame to all connected
segments.
Bridge AP
It is an AP that functions as a transparent
bridge between 2 wired LAN segments.
Bridge Host
This is also known as Work Group Bridge. This
is a non-root bridge that is connected to a
remote LAN segment and will only communicate
with repeaters or root bridges. It does not
accept association from other wireless devices.
BSS
IEEE 802.11 Basic Service Set (Radio Cell). The
BSS of an AP comprises of the stations directly
associated with the AP.
CCX
Cisco Compatible eXtensions
A set of specifications which when implemented
would make a client radio interoperable with a
Cisco WLAN infrastructure and make best use of the
innovations for enhanced security, mobility,
quality of service and network management.
CCMP
Code Mode/CBC Mac Protocol
Client (Client Station)
A wireless device in a wireless network
associated with an access point.
Direct Sequence Spread Sprectrum ( DSSS )
DSSS is a method to send data where the
transmitting and receiving systems operate at
frequencies as wide as 22MHz. The wide channels
help the participating systems to send more
information at higher data rates than the FSSS
systems.
EAP
Extensible Authentication Protocol
EAP-TLS
Extensible Authentication Protocol-Transport
Layer Security
Frequency Hopping Spread Spectrum ( FSSS )
FSSS systems hop from one frequency to another in
the allowed band of frequencies during the data
transmission. 83 MHz is specified as the allowed
band of frequencies in the 2.4 GHz spectrum.
IEEE 802.11
Standard to encourage interoperability among
wireless networking equipment.
IEEE 802.11b
The IEEE 802.11b standard describes DSSS systems
that operate in the 2.4 GHz ISM band at data
rates of 1, 2, 5,5 and 11 Mbps.
IEEE 802.11a
The IEEE 802.11a standard describes wireless LAN
operation in the 5 GHz UNII band at data rates
of 6, 9, 12, 18, 24, 36, 48 and 54 Mbps.
IEEE 802.11g
This standard specifies operation in 2.4 GHz ISM
band at data rates of 6, 9, 12, 18. 24, 36, 48 and
54 Mbps.
Industrial, Scientific and Medical band (ISM)
A license-free band specified by the Federal
Communications Commission for use by the wireless
LAN systems. The ISM bands are located starting
at 902 MHz, 2.4GHz and 5.8 GHz.
MIC
Message Integrity Check. A MIC can, optionally,
be added to WEP-encrypted 802.11 frames.
Non-Root Bridge
This wireless bridge does not connect to the main
wired LAN segment. It connects to a remote wired
LAN segment and can associate to root bridges and
other non-root bridges that accept client
associations. It also can accept associations
from other non-root bridges, repeater access
points, and client devices.
PCI
Peripheral Component Interconnect
A local bus standard developed by Intel
Corporation. Most modern PCs include a PCI bus.
PCI is a 64-bit bus, though it is usually
implemented as a 32-bit bus. It can run at clock
speeds of 33 or 66 MHz. At 32 bits and 33 MHz, it
yields a throughput rate of 133 MBps.
Repeater
Device that connects multiple segments, listening
to each and repeating signal on one to every other
connected one; regenerates each transmission
so that it can travel farther.
Repeater or Non-root Access Point
The repeater access point is not connected
to the wired LAN. The Repeater is a wireless
LAN transceiver that transfers data between
a client and another access point, another
repeater, or between two bridges. The repeater
is placed within radio range of an access point
connected to the wired LAN, another repeater, or
an non-root bridge to extend the range of the
infrastructure.
Root Access Point
This access point connects clients to the main
wired LAN.
Root Wireless Bridge
This wireless bridge is connected to the main
wired LAN. This wireless bridge can communicate
with non-root wireless bridges, repeater access
points, and client devices but not with another
wireless root bridge. Only one wireless bridge
in a wireless LAN can be set as the wireless
root bridge.
SSID
Radio Service Set ID. It is used for identification
during association.
STA (WSTA)
A non-AP 802.11 wireless station.
TKIP
WPA Temporal Key encryption.
Unlicensed National Information Infrastucture (UNII)
The UNII bands are in the 5 GHz range and are 100
MHz wide. These bands are used by 802.11a-compliant
devices.
WEP
Wired Equivalent Privacy. 'WEP' is generally used
to refer to 802.11 encryption.
WPA
WiFi Protected Access
Work Group Bridges (WGB)
See bridge host."REVISION"200701050000Z"DESCRIPTION"The changes made are as follows.
- Added more explanations on the kind of entries
populated for cDot11ClientConfigInfoTable, on
infrastructure clients like repeaters, non-root
bridges and workgroup bridges.
- Added cDot11ClientNewKeyManagement object
to the cDot11ClientConfigInfoTable. "REVISION"200606120000Z"DESCRIPTION"The changes made are as follows.
- Added the following enumerations to
CDot11ClientRadioType.
- 'cb21ag'
- 'ccxClient'
- 'unknown'
- Added 'unknown' to CDot11ClientDevType.
- Added cDot11ClientDevObjectID to
cDot11ClientConfigInfoTable. "REVISION"200503080000Z"DESCRIPTION"Updated CDot11ClientDevType to include a new device
type. Updated CDot11ClientRadioType to include new
radio types."REVISION"200411280000Z"DESCRIPTION"Correct spelling of CDot11AuthenicationMethod to
CDot11AuthenticationMethod."REVISION"200410180000Z"DESCRIPTION"Added new client VLAN, sub-interface ifIndex, key
management type, authentication type, and cipher
type information."REVISION"200402190000Z"DESCRIPTION"Added new cd11IfCipherStatsTable for radio interface
AES, TKIP, and security tempering attempts statistics."REVISION"200307270000Z"DESCRIPTION"Added new IEEE 802.11g radio type to
CDot11ClientRadioType and new AP device type to
CDot11ClientDevType."REVISION"200304110000Z"DESCRIPTION"Added new objects for client software version, IP
address, name, and association or authentication state."REVISION"200301290000Z"
DESCRIPTION"Added new 5GHz radio type to CDot11ClientRadioType
and new client types to CDot11ClientDevType."REVISION"200207150000Z"DESCRIPTION"Corrected the unit of cDot11ClientBytesReceived."REVISION"200204170000Z"DESCRIPTION"Added a new index cd11IfAuxSsid and a new object
cDot11ClientParentAddress to the
cDot11ClientConfigInfoTable."REVISION"200203060000Z"DESCRIPTION"Initial version of this MIB module."::={ ciscoMgmt 273}ciscoDot11AssocMIBObjects OBJECTIDENTIFIER::={ ciscoDot11AssociationMIB 1}cDot11AssociationGlobal OBJECTIDENTIFIER::={ ciscoDot11AssocMIBObjects 1}
cDot11ClientConfiguration OBJECTIDENTIFIER::={ ciscoDot11AssocMIBObjects 2}cDot11ClientStatistics OBJECTIDENTIFIER::={ ciscoDot11AssocMIBObjects 3}-- Textual ConventionsCDot11ClientRoleClassType ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"This defines the type of role of a wireless device.
The device types are:
clientStation(0) - client station,
repeater(1) - repeater access point,
accessPoint(2) - access point,
bridgeHost(3) - bridge host (WGB),
bridge(4) - bridge,
bridgeRoot(5) - root bridge
ethernetClient(6) - Ethernet client through WGB."SYNTAXINTEGER{clientStation(0),repeater(1),
accessPoint(2),bridgeHost(3),bridge(4),bridgeRoot(5),ethernetClient(6)}CDot11ClientDevType ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"This defines the classifications of wireless client
device. The devices are classified by their Ethernet
connection, serial connection, and the type of radio
it uses. The device classifications are:
unknown(1) - unknown,
ethernetAP(76) - Ethernet access point,
ethernetBridge(77) - Ethernet bridge,
pc3000Client(84) - client with a 3000 radio,
serialUC(85) - serial port universal
client,
ethernetUC(86) - Ethernet universal
client,
pc3500Client(101) - client with a 5300 radio,
pc4500Client(102) - client with a 4500 radio,
generic80211Client(104) - client of an unknown
radio type and non-Cisco
device,
pc4800Client(109) - client with a 4800 radio,
pc3100Client(110) - client with a 3100 radio,
mc(111) - multiple client Ethernet,
universal client,
ethernetClient(112) - Ethernet client of a WGB,
pc4800bClient(117) - client with a 4800b radio,
wgbNoDiversity(123) - WGB with one antenna,
wgb(124) - WGB with two antennas,
series350Client(127) - client with 350 series
radio,
series370Client(128) - client with 370 series
dot11A radio,
c1100SeriesAP(129) - Cisco 1100 series AP,
c1410SeriesBridge(130) - Cisco 1410 series bridge,
c1200SeriesAP(132) - Cisco 1200 series AP,
mp2xClient(133) - client with MP2x IEEE
802.11g radio,
c350SeriesAP(134) - Cisco IOS 350 series AP,
cb21agClient(135) - Cisco CB21AG/PI21AG
IEEE 802.lla/b/g client,
radioKodiak(136) - Cisco IEEE 802.11a
AIR-RM21A-x-K9 and
AIR-RM22A-x-K9 radio,
c1130SeriesAP(137) - Cisco 1130 series AP,
c1310SeriesBridge(138) - Cisco 1310 series bridge,
c7920phone(139) - Cisco 7920 series phone,
c1240SeriesAP(140) - Cisco 1240 series AP. "SYNTAXINTEGER{unknown(1),ethernetAP(76),ethernetBridge(77),pc3000Client(84),serialUC(85),ethernetUC(86),pc3500Client(101),
pc4500Client(102),generic80211Client(104),pc4800Client(109),pc3100Client(110),mc(111),ethernetClient(112),pc4800bClient(117),wgbNoDiversity(123),wgb(124),series350Client(127),series370Client(128),c1100SeriesAP(129),c1410SeriesBridge(130),
c1200SeriesAP(132),mp2xClient(133),c350SeriesAP(134),cb21agClient(135),radioKodiak(136),c1130SeriesAP(137),c1310SeriesBridge(138),c7920phone(139),c1240SeriesAP(140)}CDot11ClientRadioType ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"This defines the radio classifications of wireless
stations. It indicates the model number of the radio
in the remote unit. The radio classifications are:
unknown(1) - unknown,
ccxClient(2) - CCX-compatible radio,
pc3500(3) - Cisco 3500 radio,
pc3000(4) - Cisco 3000 radio,
pc4500(6) - Cisco 4500 radio,
pc4800(12) - Cisco 4800 radio,
pc3100(13) - Cisco 3100 radio,
series340(33) - Cisco 340 series radio,
series350(34) - Cisco 350 series radio,
series370(35) - Cisco 370 series dot11A radio,
bridge1410(36) - Cisco 1410 bridge 5GHz radio,
mp2xSeries(37) - Cisco 11g MP2x series radio,
rm2xSeries(38) - Cisco 11a RM2x series radio,
rm2gSeries(39) - Cisco 11g RM2x series radio,
mp2xMAR(40) - Cisco 3210 MAR 11g MP2x radio,
cb21ag(46) - Cisco CB21AG/PI21AG
IEEE 802.11a/b/g radio. "SYNTAXINTEGER{unknown(1),ccxClient(2),pc3500(3),
pc3000(4),pc4500(6),pc4800(12),pc3100(13),series340(33),series350(34),series370(35),bridge1410(36),mp2xSeries(37),rm2xSeries(38),rm2gSeries(39),mp2xMAR(40),cb21ag(46)}
CDot11AuthenticationMethod ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"These are the IEEE 802.11 supported
authentication methods for wireless devices:
open(1) - Open System
sharedKey(2) - Shared Key
networkEap(129) - Network EAP."REFERENCE"IEEE Std 802.11-Jan 14 1999, Wireless LAN Medium
Access Control and Physical Layer Specifications,
LAN MAN Standards Committee of the IEEE Computer
Society, IEEE802dot11-MIB,
dot11AuthenticationAlgorithm."SYNTAXINTEGER{open(1),sharedKey(2),networkEap(129)}CDot11AdditionalAuthenMethod ::=TEXTUAL-CONVENTIONSTATUScurrent
DESCRIPTION"These are the additional authentications that can
be performed after IEEE 802.11 Open System or Shared
Key authentication is completed successfully:
mac(0) - MAC address authentication
eap(1) - EAP authentication."SYNTAXBITS{mac(0),eap(1)}CDot11Dot1xAuthenMethod ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"These are the IEEE 802.1x authentication methods
performed between the IEEE 802.11 wireless clients
and the authentication server. Depending on the
server and client configuration, more than one
authentication methods can be performed for any
IEEE 802.11 association. The IEEE 802.1x
authentication methods are:
md5(0) - Message-digest algorithm
leap(1) - Cisco Light-weight EAP
peap(2) - Protected EAP
eapTls(3) - EAP Transport Layer Security
eapSim(4) - EAP Enhanced GSM Authentication
eapFast(5) - Cisco EAP Fast."SYNTAXBITS{md5(0),leap(1),peap(2),eapTls(3),eapSim(4),eapFast(5)}CDot11KeyManagementMethod ::=TEXTUAL-CONVENTIONSTATUSdeprecatedDESCRIPTION"These are the encryption key management methods
for IEEE 802.11 wireless frame encryption. The key
management methods are:
wpa(0) - Wi-Fi Protected Access
cckm(1) - Cisco proprietary key management."SYNTAXBITS{wpa(0),cckm(1)}CDot11NewKeyManagementMethod ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"These are the encryption key management methods
for IEEE 802.11 wireless frame encryption. The key
management methods are:
cckm(0) - Cisco proprietary key management
wpa1(1) - Wi-Fi Protected Access version 1
wpa2(2) - Wi-Fi Protected Access version 2."SYNTAXBITS{cckm(0),wpa1(1),wpa2(2)}
--********************************************************************
--* dot11 association global parameters
--********************************************************************cDot11ParentAddress OBJECT-TYPESYNTAXMacAddressMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This is the MAC address of the parent access point
or root bridge for this device. The value is zero
if this is a root access point or bridge."::={ cDot11AssociationGlobal 1}cDot11ActiveDevicesTable OBJECT-TYPESYNTAXSEQUENCEOF CDot11ActiveDevicesEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table contains the list of active devices
currently associated with this device on each of
the IEEE 802.11 interfaces. This table has a
sparse dependent relationship on the ifTable."
::={ cDot11AssociationGlobal 2}cDot11ActiveDevicesEntry OBJECT-TYPESYNTAX CDot11ActiveDevicesEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry represents a currently active device
associated with this device. These active devices
include: wireless clients, repeaters, and bridges."INDEX{ ifIndex }::={ cDot11ActiveDevicesTable 1}
CDot11ActiveDevicesEntry ::=SEQUENCE{
cDot11ActiveWirelessClients Gauge32,
cDot11ActiveBridges Gauge32,
cDot11ActiveRepeaters Gauge32}cDot11ActiveWirelessClients OBJECT-TYPESYNTAXGauge32(0..2007)
UNITS"Device"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This is the number of wireless clients
currently associating with this device on this
interface."::={ cDot11ActiveDevicesEntry 1}cDot11ActiveBridges OBJECT-TYPESYNTAXGauge32(0..2007)UNITS"Device"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This is the number of bridges currently
associating with this device on this interface."::={ cDot11ActiveDevicesEntry 2}cDot11ActiveRepeaters OBJECT-TYPE
SYNTAXGauge32(0..2007)UNITS"Device"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This is the number of repeaters currently
associating with this device on this interface."::={ cDot11ActiveDevicesEntry 3}cDot11AssociationStatsTable OBJECT-TYPESYNTAXSEQUENCEOF CDot11AssociationStatsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table contains statistics for various
devices associated with this device on each
of the IEEE 802.11 interfaces since it was
last re-started. These devices include: wireless
clients, repeaters, and bridges. This table has
a sparse dependent relationship on the ifTable."
::={ cDot11AssociationGlobal 3}cDot11AssociationStatsEntry OBJECT-TYPESYNTAX CDot11AssociationStatsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each entry provides association statistics of
various devices interacting with this device on
each of the IEEE 802.11 interfaces."INDEX{ ifIndex }::={ cDot11AssociationStatsTable 1}
CDot11AssociationStatsEntry ::=SEQUENCE{
cDot11AssStatsAssociated Counter32,
cDot11AssStatsAuthenticated Counter32,
cDot11AssStatsRoamedIn Counter32,
cDot11AssStatsRoamedAway Counter32,
cDot11AssStatsDeauthenticated Counter32,
cDot11AssStatsDisassociated Counter32}cDot11AssStatsAssociated OBJECT-TYPESYNTAXCounter32UNITS"client"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object counts the number of stations
associated with this device on this interface
since device re-started."::={ cDot11AssociationStatsEntry 1}cDot11AssStatsAuthenticated OBJECT-TYPESYNTAXCounter32UNITS"client"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object counts the number of stations
authenticated with this device on this interface
since device re-started."::={ cDot11AssociationStatsEntry 2}
cDot11AssStatsRoamedIn OBJECT-TYPESYNTAXCounter32UNITS"client"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object counts the number of stations
roamed from another device to this device on
this interface since device re-started."::={ cDot11AssociationStatsEntry 3}cDot11AssStatsRoamedAway OBJECT-TYPESYNTAXCounter32UNITS"client"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object counts the number of stations
roamed away from this device on this interface
since device re-started."::={ cDot11AssociationStatsEntry 4}
cDot11AssStatsDeauthenticated OBJECT-TYPESYNTAXCounter32UNITS"client"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object counts the number of stations
deauthenticated with this device on this
interface since device re-started."::={ cDot11AssociationStatsEntry 5}cDot11AssStatsDisassociated OBJECT-TYPESYNTAXCounter32UNITS"client"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object counts the number of stations
disassociated with this device on this
interface since device re-started."::={ cDot11AssociationStatsEntry 6}
cd11IfCipherStatsTable OBJECT-TYPESYNTAXSEQUENCEOF Cd11IfCipherStatsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table includes AES, TKIP, and security tempering
attempts statistics collected by the IEEE 802.11 radio
interfaces and system management. This table has a
sparse dependent relationship on the ifTable. For
each entry in this table, there exists an entry in the
ifTable of ifType ieee80211(71)."::={ cDot11AssociationGlobal 4}cd11IfCipherStatsEntry OBJECT-TYPESYNTAX Cd11IfCipherStatsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each entry provides cipher related statistics
collected on each of the IEEE 802.11 interfaces."INDEX{ ifIndex }
::={ cd11IfCipherStatsTable 1}
Cd11IfCipherStatsEntry ::=SEQUENCE{
cd11IfCipherMicFailClientAddress MacAddress,
cd11IfCipherTkipLocalMicFailures Counter32,
cd11IfCipherTkipRemotMicFailures Counter32,
cd11IfCipherTkipCounterMeasInvok Counter32,
cd11IfCipherCcmpReplaysDiscarded Counter32,
cd11IfCipherTkipReplaysDetected Counter32}cd11IfCipherMicFailClientAddress OBJECT-TYPESYNTAXMacAddressMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This is MAC address of the client attached to
this radio interface that caused the most recent
MIC failure."::={ cd11IfCipherStatsEntry 1}
cd11IfCipherTkipLocalMicFailures OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object counts the number of MIC failures
encountered on this radio interface since device
re-started."::={ cd11IfCipherStatsEntry 2}cd11IfCipherTkipRemotMicFailures OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object counts the number of MIC failures
reported by clients on this radio interface
since device re-started."::={ cd11IfCipherStatsEntry 3}cd11IfCipherTkipCounterMeasInvok OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-only
STATUScurrentDESCRIPTION"This object counts the number of TKIP Counter
Measures invoked on this interface since
device re-started."::={ cd11IfCipherStatsEntry 4}cd11IfCipherCcmpReplaysDiscarded OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object counts the number of received
unicast fragments discarded by replay mechanism
on this interface since device re-started."::={ cd11IfCipherStatsEntry 5}cd11IfCipherTkipReplaysDetected OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object counts the number of TKIP replay
errors detected on this interface since device
re-started."::={ cd11IfCipherStatsEntry 6}--********************************************************************
--* dot11 client configuration
--********************************************************************cDot11ClientConfigInfoTable OBJECT-TYPESYNTAXSEQUENCEOF CDot11ClientConfigInfoEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table contains configuration information of
client devices. Entries on this table are created
by the device radio driver when clients establish
association with the device. Entries are removed
when clients disassociate with the device. These
clients include: wireless clients, repeaters,
and bridges. On Infrastructure clients like
repeaters, non-root bridges and workgroup bridges,
this table also has an entry for the parent device
they are associated to."::={ cDot11ClientConfiguration 1}
cDot11ClientConfigInfoEntry OBJECT-TYPESYNTAX CDot11ClientConfigInfoEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each entry is the device specification of a client
of this device on the IEEE 802.11 radio interfaces.
Clients are grouped according to the SSIDs of the
interfaces they use for associations and the MAC
address of their parent devices if the clients are
repeat APs."INDEX{
ifIndex,
cd11IfAuxSsid,
cDot11ClientAddress
}::={ cDot11ClientConfigInfoTable 1}
CDot11ClientConfigInfoEntry ::=SEQUENCE{
cDot11ClientAddress MacAddress,
cDot11ClientParentAddress MacAddress,
cDot11ClientRoleClassType CDot11ClientRoleClassType,
cDot11ClientDevType CDot11ClientDevType,
cDot11ClientRadioType CDot11ClientRadioType,
cDot11ClientWepEnabled TruthValue,
cDot11ClientWepKeyMixEnabled TruthValue,
cDot11ClientMicEnabled TruthValue,
cDot11ClientPowerSaveMode INTEGER,
cDot11ClientAid Unsigned32,
cDot11ClientDataRateSet OCTETSTRING,
cDot11ClientSoftwareVersion SnmpAdminString,
cDot11ClientName SnmpAdminString,
cDot11ClientAssociationState INTEGER,
cDot11ClientIpAddressType InetAddressType,
cDot11ClientIpAddress InetAddress,
cDot11ClientVlanId CDot11IfVlanIdOrZero,
cDot11ClientSubIfIndex InterfaceIndex,
cDot11ClientAuthenAlgorithm
CDot11AuthenticationMethod,
cDot11ClientAdditionalAuthen
CDot11AdditionalAuthenMethod,
cDot11ClientDot1xAuthenAlgorithm
CDot11Dot1xAuthenMethod,
cDot11ClientKeyManagement
CDot11KeyManagementMethod,
cDot11ClientUnicastCipher
CDot11IfCipherType,
cDot11ClientMulticastCipher
CDot11IfCipherType,
cDot11ClientDevObjectID OBJECTIDENTIFIER,
cDot11ClientNewKeyManagement
CDot11NewKeyManagementMethod
}cDot11ClientAddress OBJECT-TYPESYNTAXMacAddressMAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The MAC address of the client."::={ cDot11ClientConfigInfoEntry 1}
cDot11ClientParentAddress OBJECT-TYPESYNTAXMacAddressMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The MAC address of the parent of the client if the
client is a repeater AP. If this client has no parent,
the value is '00000000'h."::={ cDot11ClientConfigInfoEntry 2}cDot11ClientRoleClassType OBJECT-TYPESYNTAX CDot11ClientRoleClassType
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The role classification of the client."::={ cDot11ClientConfigInfoEntry 3}cDot11ClientDevType OBJECT-TYPESYNTAX CDot11ClientDevType
MAX-ACCESSread-only
STATUScurrentDESCRIPTION"The device type of the client."::={ cDot11ClientConfigInfoEntry 4}cDot11ClientRadioType OBJECT-TYPESYNTAX CDot11ClientRadioType
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The radio classification of the client."::={ cDot11ClientConfigInfoEntry 5}cDot11ClientWepEnabled OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"When this object is 'true', it indicates that the
WEP key mechanism is used for transmitting frames
of data for this client. The default value of this
object is 'false'."DEFVAL{ false }
::={ cDot11ClientConfigInfoEntry 6}cDot11ClientWepKeyMixEnabled OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"When this object is 'true', it indicates that this
client is using WEP key mixing."DEFVAL{ false }::={ cDot11ClientConfigInfoEntry 7}cDot11ClientMicEnabled OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"When this object is 'true', it indicates that the
MIC is enabled for this client. The default value of
this object is 'false'."DEFVAL{ false }::={ cDot11ClientConfigInfoEntry 8}
cDot11ClientPowerSaveMode OBJECT-TYPESYNTAXINTEGER{active(1),powersave(2)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The power management mode of this client. The
two possible modes are:
active(1) - this client is not in power-save
mode and it is actively sending or
receiving data.
powersave(2) - this client is in power-save mode and
it wakes up once a while to check for
pending data."DEFVAL{ active }::={ cDot11ClientConfigInfoEntry 9}cDot11ClientAid OBJECT-TYPE
SYNTAXUnsigned32(0..2008)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This is the association identification number of
clients or multicast addresses associating with this
device. For a multicast address with clients, the
cDot11ClientAid is '0'. For the uplink association
from this device to its parent access point, the
cDot11ClientAid is always '1'. For any multicast
address with no client currently known to be
associated with this device, the cDot11ClientAid is
'2008'."::={ cDot11ClientConfigInfoEntry 10}cDot11ClientDataRateSet OBJECT-TYPESYNTAXOCTETSTRING(SIZE(1..126))MAX-ACCESSread-only
STATUScurrentDESCRIPTION"This is the set of data rates at which this client
can transmit and receive data. Each client can
support up to 126 rates. Each octet contains an
integer value representing one of these 126 rates.
Each rate shall be within the range from 2 to 127,
corresponding to data rates in increments of 500 kb/s
from 1 Mb/s to 63.5 Mb/s, This value is reported in
transmitted Beacon, Probe Request, Probe Response,
Association Request, Association Response,
Reassociation Request, and Reassociation Response
frames, and is used to determine whether a BSS with
which the client desires to synchronize is suitable.
It is also used when starting a BSS."::={ cDot11ClientConfigInfoEntry 11}cDot11ClientSoftwareVersion OBJECT-TYPESYNTAXSnmpAdminStringMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This is the Cisco IOS software version if the other
end of the association is a bridge, access point, or
repeater. If it is a wireless client, this is the
firmware version of the client card."::={ cDot11ClientConfigInfoEntry 12}cDot11ClientName OBJECT-TYPESYNTAXSnmpAdminStringMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This is the Cisco IOS device hostname if the other
end of the association is a bridge, access point, or
repeater. If it is a wireless client, this is the
configured client name."::={ cDot11ClientConfigInfoEntry 13}cDot11ClientAssociationState OBJECT-TYPESYNTAXINTEGER{initial(1),authenNotAssociated(2),
assocAndAuthenticated(3),assocNotAnuthenticated(4)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object indicates the state of the authentication
and association process between the two parties:
initial(1) - association request
received from client,
authenNotAssociated(2) - 802.11 authenticated but
not 802.11 associated,
assocAndAuthenticated(3) - 802.11 associated and
802.1x authenticated,
assocNotAnuthenticated(4) - 802.11 associated but
802.1x not
authenticated."::={ cDot11ClientConfigInfoEntry 14}cDot11ClientIpAddressType OBJECT-TYPESYNTAXInetAddressTypeMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This is the IP address type of the
cDot11ClientIpAddress."::={ cDot11ClientConfigInfoEntry 15}cDot11ClientIpAddress OBJECT-TYPESYNTAXInetAddressMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This is the static or DHCP assigned IP address of the
client."::={ cDot11ClientConfigInfoEntry 16}cDot11ClientVlanId OBJECT-TYPESYNTAX CDot11IfVlanIdOrZero
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This is the VLAN which this wireless client is
assigned to when it is successfully associated to the
wireless station. The value is 0 if this wireless
client is not assigned to any VLAN or this wireless
station is not configured with any VLAN."::={ cDot11ClientConfigInfoEntry 17}cDot11ClientSubIfIndex OBJECT-TYPESYNTAXInterfaceIndexMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This is the ifIndex of the sub-interface which this
wireless client is assigned to when it is successfully
associated to the wireless station. The value of this
object is 0, if this wireless station is not configured
with VLAN and this wireless client is assigned to the
radio hardware interface of this wireless station."::={ cDot11ClientConfigInfoEntry 18}cDot11ClientAuthenAlgorithm OBJECT-TYPESYNTAX CDot11AuthenticationMethod
MAX-ACCESSread-onlySTATUScurrent
DESCRIPTION"This is the IEEE 802.11 authentication methods
performed between the wireless station and this client
during association."::={ cDot11ClientConfigInfoEntry 19}cDot11ClientAdditionalAuthen OBJECT-TYPESYNTAX CDot11AdditionalAuthenMethod
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"These are the additional authentications that were
performed after IEEE 802.11 Open System or Shared
Key authentication had completed. If none of the bits
is set, no additional MAC address or EAP authentication
was performed during association."::={ cDot11ClientConfigInfoEntry 20}cDot11ClientDot1xAuthenAlgorithm OBJECT-TYPESYNTAX CDot11Dot1xAuthenMethod
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION
"This the IEEE 802.1x authentication methods performed
between this wireless client and the authentication
server. If none of the bits is set, no IEEE 802.1x
authentication was performed during association."::={ cDot11ClientConfigInfoEntry 21}cDot11ClientKeyManagement OBJECT-TYPESYNTAX CDot11KeyManagementMethod
MAX-ACCESSread-onlySTATUSdeprecatedDESCRIPTION"This is the encryption key management methods
employed by this client for IEEE 802.11 wireless frame
encryption. If none of the bits is set, no key
management method is employed."::={ cDot11ClientConfigInfoEntry 22}cDot11ClientUnicastCipher OBJECT-TYPESYNTAX CDot11IfCipherType
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"These are all the possible unicast data frame cipher
encryption type combinations currently supported on
this IEEE 802.11 client. If none of the bits is set,
the client is not performing any unicast data frame
encryption.
aesccm WPA AES CCMP encryption,
ckip Cisco Per packet key hashing,
cmic Cisco MMH MIC,
ckip|cmic Cisco Per packet key hashing and
Cisco MMH MIC,
tkip WPA Temporal Key encryption,
wep128 128-bit WEP key,
wep40 40-bit WEP key.
tkip|wep128 WPA Temporal Key and 128-bit WEP,
tkip|wep40 WPA Temporal Key and 40-bit WEP."::={ cDot11ClientConfigInfoEntry 23}cDot11ClientMulticastCipher OBJECT-TYPESYNTAX CDot11IfCipherType
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"These are all the possible multi-cast data frame
cipher encryption type combinations currently supported
on this IEEE 802.11 client. If none of the bits is set,
the client is not performing any multi-cast data frame
encryption.
aesccm WPA AES CCMP encryption,
ckip Cisco Per packet key hashing,
cmic Cisco MMH MIC,
ckip|cmic Cisco Per packet key hashing and
Cisco MMH MIC,
tkip WPA Temporal Key encryption,
wep128 128-bit WEP key,
wep40 40-bit WEP key.
tkip|wep128 WPA Temporal Key and 128-bit WEP,
tkip|wep40 WPA Temporal Key and 40-bit WEP."::={ cDot11ClientConfigInfoEntry 24}cDot11ClientDevObjectID OBJECT-TYPESYNTAXOBJECTIDENTIFIERMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object indicates the authoritative
identification of the associated 802.11 client as
assigned by the respective vendor. A value of '0.0'
shall be populated if no such identification exists
for this 802.11 client. "REFERENCE
"sysObjectID from SNMPv2-MIB"::={ cDot11ClientConfigInfoEntry 25}cDot11ClientNewKeyManagement OBJECT-TYPESYNTAX CDot11NewKeyManagementMethod
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This is the encryption key management methods
employed by this client for IEEE 802.11 wireless frame
encryption. If none of the bits is set, no key
management method is employed."::={ cDot11ClientConfigInfoEntry 26}--********************************************************************
--* dot11 client statistics
--********************************************************************cDot11ClientStatisticTable OBJECT-TYPESYNTAXSEQUENCEOF CDot11ClientStatisticEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION
"This table contains statistics and status of all
clients on the cDot11ClientConfigInfoTable. This table
has a one-to-one relationship with the
cDot11ClientConfigInfoTable."::={ cDot11ClientStatistics 1}cDot11ClientStatisticEntry OBJECT-TYPESYNTAX CDot11ClientStatisticEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each entry contains statistics about errors,
data transmitting and receiving rates and counts
information of a client."AUGMENTS{ cDot11ClientConfigInfoEntry }::={ cDot11ClientStatisticTable 1}
CDot11ClientStatisticEntry ::=SEQUENCE{
cDot11ClientCurrentTxRateSet OCTETSTRING,
cDot11ClientUpTime Unsigned32,
cDot11ClientSignalStrength Integer32,
cDot11ClientSigQuality Unsigned32,
cDot11ClientAgingLeft Gauge32,
cDot11ClientPacketsReceived Counter32,
cDot11ClientBytesReceived Counter32,
cDot11ClientPacketsSent Counter32,
cDot11ClientBytesSent Counter32,
cDot11ClientDuplicates Counter32,
cDot11ClientMsduRetries Counter32,
cDot11ClientMsduFails Counter32,
cDot11ClientWepErrors Counter32,
cDot11ClientMicErrors Counter32,
cDot11ClientMicMissingFrames Counter32}cDot11ClientCurrentTxRateSet OBJECT-TYPESYNTAXOCTETSTRING(SIZE(1..126))
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This is the set current transmit data rates for
this client. Each client can transmit data at all
of its configured rates. There is a maximum of 126
it can configure to transmit. Each octet contains
an integer value representing one of these 126
rates it is currently transmitting. Each rate shall
be within the range from 2 to 127, corresponding
to data rates in increments of 500 kb/s from
1 Mb/s to 63.5 Mb/s. This value is reported in
transmitted Beacon, Probe Request, Probe Response,
Association Request, Association Response,
Reassociation Request, and Reassociation Response
frames."::={ cDot11ClientStatisticEntry 1}cDot11ClientUpTime OBJECT-TYPESYNTAXUnsigned32UNITS"second"
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The time in seconds that this client has been
associated with this device."::={ cDot11ClientStatisticEntry 2}cDot11ClientSignalStrength OBJECT-TYPESYNTAXInteger32(-100..0)UNITS"dBm"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This is a device-dependent measure of the signal
strength of the most recently received packet from
this client. It may be normalized or unnormalized."::={ cDot11ClientStatisticEntry 3}cDot11ClientSigQuality OBJECT-TYPESYNTAXUnsigned32(0..100)
UNITS"percentage"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This is a device-dependent measure of the signal
quality of the most recently received packet from
this client."::={ cDot11ClientStatisticEntry 4}cDot11ClientAgingLeft OBJECT-TYPESYNTAXGauge32UNITS"second"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of seconds of aging time left for
this client."::={ cDot11ClientStatisticEntry 5}cDot11ClientPacketsReceived OBJECT-TYPESYNTAXCounter32UNITS"packet"
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of packets received from this client."::={ cDot11ClientStatisticEntry 6}cDot11ClientBytesReceived OBJECT-TYPESYNTAXCounter32UNITS"byte"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of bytes received from this client."::={ cDot11ClientStatisticEntry 7}cDot11ClientPacketsSent OBJECT-TYPESYNTAXCounter32UNITS"packet"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION
"The number of packets sent to this client."::={ cDot11ClientStatisticEntry 8}cDot11ClientBytesSent OBJECT-TYPESYNTAXCounter32UNITS"byte"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of bytes sent to this client."::={ cDot11ClientStatisticEntry 9}cDot11ClientDuplicates OBJECT-TYPESYNTAXCounter32UNITS"packet"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This counter increments when a packet for this
client is received and the Sequence Control field
in the packet header indicates the packet is a
duplicate."::={ cDot11ClientStatisticEntry 10}
cDot11ClientMsduRetries OBJECT-TYPESYNTAXCounter32UNITS"packet"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This counter increments when an MSDU is successfully
transmitted after one or more retransmissions for this
client."::={ cDot11ClientStatisticEntry 11}cDot11ClientMsduFails OBJECT-TYPESYNTAXCounter32UNITS"packet"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This counter increments when an MSDU is not
transmitted successfully for this client due to the
number of transmit attempts exceeding some limit."::={ cDot11ClientStatisticEntry 12}
cDot11ClientWepErrors OBJECT-TYPESYNTAXCounter32UNITS"packet"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This is the number of packets received from this
client which failed to be properly decrypted via
the WEP security mechanism."::={ cDot11ClientStatisticEntry 13}cDot11ClientMicErrors OBJECT-TYPESYNTAXCounter32UNITS"error"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This is the number of MIC errors for this client."::={ cDot11ClientStatisticEntry 14}cDot11ClientMicMissingFrames OBJECT-TYPE
SYNTAXCounter32UNITS"packet"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This is the number of missing MIC packets for
this client."::={ cDot11ClientStatisticEntry 15}-- *****************************************************************
-- Conformance information
-- *****************************************************************ciscoDot11AssocMIBConformance OBJECTIDENTIFIER::={ ciscoDot11AssociationMIB 2}ciscoDot11AssocMIBCompliances OBJECTIDENTIFIER::={ ciscoDot11AssocMIBConformance 1}ciscoDot11AssocMIBGroups OBJECTIDENTIFIER::={ ciscoDot11AssocMIBConformance 2}
--********************************************************************
--* Compliance statements
--********************************************************************ciscoDot11AssocMIBCompliance MODULE-COMPLIANCESTATUSdeprecatedDESCRIPTION"The compliance statement for the ciscoDot11Assoc
group."MODULEMANDATORY-GROUPS{
ciscoDot11AssocGlobalGroup,
ciscoDot11ClientConfigGroup,
ciscoDot11ClientStatGroup
}::={ ciscoDot11AssocMIBCompliances 1}ciscoDot11AssocMIBComplianceRev1 MODULE-COMPLIANCESTATUSdeprecatedDESCRIPTION"The compliance statement for the ciscoDot11Assoc
group. This is deprecated in favor of the
ciscoDot11AssocMIBComplianceRev2."MODULEMANDATORY-GROUPS{
ciscoDot11AssocGlobalGroup,
ciscoDot11ClientConfigGroup,
ciscoDot11ClientStatGroup,
ciscoDot11ClientInfoGroup
}::={ ciscoDot11AssocMIBCompliances 2}ciscoDot11AssocMIBComplianceRev2 MODULE-COMPLIANCESTATUSdeprecatedDESCRIPTION"The compliance statement for the ciscoDot11Assoc
group."MODULEMANDATORY-GROUPS{
ciscoDot11ClientConfigGroup,
ciscoDot11ClientStatGroup,
ciscoDot11ClientInfoGroup,
ciscoDot11IfAssocStatGroup,
ciscoDot11IfCipherStatGroup
}GROUP ciscoDot11ApAssocGlobalGroup
DESCRIPTION"This group is required only if the platform
is a IEEE 802.11 AP/repeater or bridge."
::={ ciscoDot11AssocMIBCompliances 3}ciscoDot11AssocMIBComplianceRev3 MODULE-COMPLIANCESTATUSdeprecated-- by ciscoDot11AssocMIBComplianceRev4DESCRIPTION"The compliance statement for this
ciscoDot11AssociationMIB module."MODULEMANDATORY-GROUPS{
ciscoDot11ClientConfigGroup,
ciscoDot11ClientAuthenGroup,
ciscoDot11ClientStatGroup,
ciscoDot11ClientInfoGroup,
ciscoDot11IfAssocStatGroup,
ciscoDot11IfCipherStatGroup
}GROUP ciscoDot11ApAssocGlobalGroup
DESCRIPTION"This group is required only if the platform
is a IEEE 802.11 AP/repeater or bridge."::={ ciscoDot11AssocMIBCompliances 4}
ciscoDot11AssocMIBComplianceRev4 MODULE-COMPLIANCESTATUScurrentDESCRIPTION"The compliance statement for this
ciscoDot11AssociationMIB module."MODULEMANDATORY-GROUPS{
ciscoDot11ClientConfigGroup,
ciscoDot11ClientAuthenGroup,
ciscoDot11ClientStatGroup,
ciscoDot11ClientInfoGroup,
ciscoDot11IfAssocStatGroup,
ciscoDot11IfCipherStatGroup,
ciscoDot11ClientConfigExtGroup
}GROUP ciscoDot11ApAssocGlobalGroup
DESCRIPTION"This group is required only if the platform
is a IEEE 802.11 AP/repeater or bridge."::={ ciscoDot11AssocMIBCompliances 5}ciscoDot11AssocMIBComplianceRev5 MODULE-COMPLIANCE
STATUScurrentDESCRIPTION"The compliance statement for this
ciscoDot11AssociationMIB module."MODULEMANDATORY-GROUPS{
ciscoDot11ClientConfigGroup,
ciscoDot11ClientAuthenGroup,
ciscoDot11ClientStatGroup,
ciscoDot11ClientInfoGroup,
ciscoDot11IfAssocStatGroup,
ciscoDot11IfCipherStatGroup,
ciscoDot11ClientConfigExtGroup,
ciscoDot11ClientNewAuthenGroup
}GROUP ciscoDot11ApAssocGlobalGroup
DESCRIPTION"This group is required only if the platform
is a IEEE 802.11 AP/repeater or bridge."::={ ciscoDot11AssocMIBCompliances 6}--********************************************************************
--* Units of conformance
--********************************************************************ciscoDot11AssocGlobalGroup OBJECT-GROUPOBJECTS{
cDot11ParentAddress,
cDot11ActiveWirelessClients,
cDot11ActiveBridges,
cDot11ActiveRepeaters,
cDot11AssStatsAssociated,
cDot11AssStatsAuthenticated,
cDot11AssStatsRoamedIn,
cDot11AssStatsRoamedAway,
cDot11AssStatsDeauthenticated,
cDot11AssStatsDisassociated
}STATUSdeprecatedDESCRIPTION"This is the device association information group.
This is deprecated in favor of the
ciscoDot11IfAssocStatGroup."::={ ciscoDot11AssocMIBGroups 1}ciscoDot11ClientConfigGroup OBJECT-GROUPOBJECTS{
cDot11ClientParentAddress,
cDot11ClientRoleClassType,
cDot11ClientDevType,
cDot11ClientRadioType,
cDot11ClientWepEnabled,
cDot11ClientWepKeyMixEnabled,
cDot11ClientMicEnabled,
cDot11ClientPowerSaveMode,
cDot11ClientAid,
cDot11ClientDataRateSet
}STATUScurrentDESCRIPTION"This is the client configuration information group."::={ ciscoDot11AssocMIBGroups 2}ciscoDot11ClientStatGroup OBJECT-GROUPOBJECTS{
cDot11ClientCurrentTxRateSet,
cDot11ClientUpTime,
cDot11ClientSignalStrength,
cDot11ClientSigQuality,
cDot11ClientPacketsReceived,
cDot11ClientBytesReceived,
cDot11ClientPacketsSent,
cDot11ClientBytesSent,
cDot11ClientAgingLeft,
cDot11ClientDuplicates,
cDot11ClientMsduRetries,
cDot11ClientMsduFails,
cDot11ClientWepErrors,
cDot11ClientMicErrors,
cDot11ClientMicMissingFrames
}STATUScurrentDESCRIPTION"This is the client statistics group."::={ ciscoDot11AssocMIBGroups 3}ciscoDot11ClientInfoGroup OBJECT-GROUPOBJECTS{
cDot11ClientSoftwareVersion,
cDot11ClientName,
cDot11ClientAssociationState,
cDot11ClientIpAddressType,
cDot11ClientIpAddress
}STATUScurrentDESCRIPTION"This group provides additional client specific
information."
::={ ciscoDot11AssocMIBGroups 4}ciscoDot11ApAssocGlobalGroup OBJECT-GROUPOBJECTS{
cDot11ParentAddress
}STATUScurrentDESCRIPTION"This group includes per AP or bridge global
configuration information."::={ ciscoDot11AssocMIBGroups 5}ciscoDot11IfAssocStatGroup OBJECT-GROUPOBJECTS{
cDot11ActiveWirelessClients,
cDot11ActiveBridges,
cDot11ActiveRepeaters,
cDot11AssStatsAssociated,
cDot11AssStatsAuthenticated,
cDot11AssStatsRoamedIn,
cDot11AssStatsRoamedAway,
cDot11AssStatsDeauthenticated,
cDot11AssStatsDisassociated
}STATUScurrent
DESCRIPTION"This group includes per IEEE 802.11 radio
interface association statistics."::={ ciscoDot11AssocMIBGroups 6}ciscoDot11IfCipherStatGroup OBJECT-GROUPOBJECTS{
cd11IfCipherMicFailClientAddress,
cd11IfCipherTkipLocalMicFailures,
cd11IfCipherTkipRemotMicFailures,
cd11IfCipherTkipCounterMeasInvok,
cd11IfCipherCcmpReplaysDiscarded,
cd11IfCipherTkipReplaysDetected
}STATUScurrentDESCRIPTION"This group includes per IEEE 802.11 radio
interface cipher related statistics collected."::={ ciscoDot11AssocMIBGroups 7}ciscoDot11ClientAuthenGroup OBJECT-GROUPOBJECTS{
cDot11ClientVlanId,
cDot11ClientSubIfIndex,
cDot11ClientAuthenAlgorithm,
cDot11ClientAdditionalAuthen,
cDot11ClientDot1xAuthenAlgorithm,
cDot11ClientKeyManagement,
cDot11ClientUnicastCipher,
cDot11ClientMulticastCipher
}STATUSdeprecatedDESCRIPTION"This group includes per IEEE 802.11 radio
interface cipher related statistics collected."::={ ciscoDot11AssocMIBGroups 8}ciscoDot11ClientConfigExtGroup OBJECT-GROUPOBJECTS{
cDot11ClientDevObjectID
}STATUScurrentDESCRIPTION"This group provides more configuration
information about a particular associated 802.11
client. "::={ ciscoDot11AssocMIBGroups 9}
ciscoDot11ClientNewAuthenGroup OBJECT-GROUPOBJECTS{
cDot11ClientNewKeyManagement
}STATUScurrentDESCRIPTION"This group includes per IEEE 802.11 radio
interface cipher related statistics collected."::={ ciscoDot11AssocMIBGroups 10}--********************************************************************
--* End of units of conformance
--********************************************************************END